BellaVia Basic Wire Mesh Seat
Seat, or seat/backrest surfaces of one-piece wire mesh. Tube frame of round pipe, 42 mm diameter. Feet seamlessly integrated with the seat, or, seat/backrest surfaces. Designed with four sections of higher mesh density to visually indicate seating and for additional stabilization. Higher mesh density on the outer rims, trapezoidal tapered. 15 x 20 mm mesh, 3.5 mm wire thickness. Upper wires crosswise to sitting direction. Trapezoidal transition from the feet to the seat surface, or respectively, to the seat and backrest surfaces. Completely galvanised and whirl-sintered in polyamide-Rilsan, minimum coating thickness 350 microns.
Ground contact:
- Dowelling by means of commercially available anchor and screw systems (pull-out resistance > 8kN per mount).
Available upon request:
- Fastening rail for mobile placement