What is Roocycle Radiant M?

Roocycle Radiant M a recycled composite material made from a mixture of magnesium oxide (MgO), non organic minerals, bonders and fibre mesh composites. Source of many ingredients is recycled closed cell and many come from the by products of the steel industry. Roocycle Radiant M is a proven material which has been re-developed into an extensively quality tested modern building board. Roocycle Radiant M is completely free of toxins, including formaldehyde, silica, asbestos, heavy metals, and organic solvents. It’s non-toxic, naturally resistant to fire, water, and impact; and increases the R value in any panel application.

Roocycle Radiant M does not burn or melt at temperatures less than 1200ºC. The table below compares other building materials.

Burn Table Front Cover Small


Benefits of Roocycle Radiant M

  • Roocycle Radiant M has been tested to 1200°C with no combustion or flame out.
  • Roocycle Radiant M does not absorb water and so superheated steam will not “blow out” the product.
  • Roocycle Radiant M is totally fire resistant. It will not burn in a fire storm.
  • Roocycle Radiant M is applicable in BAL 12.5 to 40 and FZ flame zone regulation areas and meets the AS 3959 requirements, when used to protect exposed timber framing eaves joists etc, under AS/ NZ 3837 materials.
  • Roocycle Radiant M insulation properties help protect internal furnishing from flash burning from high external temperatures
  • Roocycle Radiant M will not ignite from ember attacks. Ember attack is the largest single national contributor to home loss.
  • Roocycle Radiant M is 8 to 10 times stronger than other products and insulates from intense heat and cold.
  • Roocycle Radiant M does not break down in water so is ideal for flood prone areas
  • Roocycle Radiant M is of no interest to insect pests and termites.
  • Roocycle Radiant M exceeds BCA minimum requirements for airborne sound insulation for a wall between attached dwellings and meets the highest possible AAAC acoustic rating of 5 stars.
  • Roocycle Radiant M During the manufacturing process, in carbonation, draws back 90% of the CO2 used to produce it and makes it a virtually carbon neutral product.
  • Roocycle Radiant M satisfies AS 3959 and AS/NZS 3837 (BCA)
  • Roocycle Radiant M – most standard paints will work well
  • Roocycle Radiant M 10mm and 6mm have a special class 4 finish so can be painted directly
  • Roocycle Radiant M The 20mm board does not have class 4 finish and may have slight pitting

Uses of Roocycle Radiant M

  • Walking Tracks
  • Boardwalks
  • Furniture
  • Bins
  • Fencing/Bollards
  • Viewing Platforms
  • Decking
  • Shelters

Roocycle Radiant M Span Test

Load Test Data



Fire Resistant (<1300ºC), Roocycle